| Customization: | Available |
|---|---|
| Rated Voltage Put in: | 220V |
| Adjust Range: | 1A-40A /1A~63A |
|
Still deciding? Get samples of US$ 3.5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
When the mains voltage exceeds the set overvoltage action voltage value of the protector or lower than the undervoltage action voltage value of the protector, the protector can quickly and reliably break the circuit, and then protect the safety of electrical appliances and our safety.And if the fault voltage of the line has reached the maximum time, this time the protector will not be affected, will not be damaged.
If the voltage runs normally, the protector can automatically switch on the power supply and restore the power supply. All functions are implemented automatically, and no manual operation is required in this process.On the panel is a light-emitting diode, which shows how well the protector is working.Indicator Green indicates the working power supply. If the indicator is off red, the power supply is normal. If the indicator is on red, the power supply is cut off.
|
Rated supply voltage
|
AC220V
|
|
Operation voltage range
|
AC 80V~400V (Single phase)
|
|
Current Type
|
AC
|
|
Item Name
|
Adjustable Voltage Protector
|
|
Brand
|
HTDQAFCI
|
|
Rated insulation voltage
|
400V
|
|
Over current setting range
|
1A-40A /1-63A adjustable
|
|
Reset delay time
|
1-300S adjustable (factory set 30s)
|
|
Own power consumption
|
less than or equal to 2W
|
|
Electrical machinery life
|
greater than or equal to 100,000 times
|
|
Sample
|
Free
|
|
Dimensions
|
81*36*66 mm
|
| Protect degree | 106 |
| Storage temperature | -30~70 degrees |
| Terminal size top/bottom for cable/busbar | 25mm 218-3AWG |
| Pollution degree | IP20 |
| Terminal type | Cable/pin type busbar/U-type busbar |
){kind=link}